1000ZooMCar Drive Maintenance

Check the fuses for melted filaments. The fuse panel is located at the driver's side blow-of-foot panel for majority Chryslers. To replace any blown fuses.

Check the other windows for adapted operation. If only one Fenestrate does not function, or is extremely slow, then the Engine could be damaged. The switch would have be checked Front replacing the motor, and the process will follow.

Disconnect the positive Limit on the battery by rotation the bolt counterclockwise. Set the Coward terminal aside, but not contact any metal.

Remove the power Fenestrate switch assembly by rising the edge up with a screwdriver and traction the unit firmly of the panel. Once the assembly is out, disconnection the wiring harness adapter catch by traction it apart. Set the switches aside. Some models may to have multiple switches, which can be interchanged with the suspect switch to Control for operation. To replug the battery temporarily. If the Fenestrate operates correctly with the ad hoc switch, To replace the bad switch at this time. No change in operation indicate a bad power motor.

Turn the interior Carry handle screw In the contrary direction of the needles of a watch to to remove it.

Turn the arm rest bolts counterclockwise, if applicable. This free the material connections to the panel.

Pull the panel free of the Carry metal, release the pop rivets one by one. The plastic rivets that catch the panel to the Carry can become fragile as they age and may to require replacement.

Disconnect the Engine from the wiring harness by release the hook on the adapter catch and traction it apart.

Turn the Engine mount bolts in a In the contrary direction of the needles of a watch direction until the Engine is free. The Engine can be drawn straight out, far from the Fenestrate regulator gears.

Replace the Engine with a new unit, then position it back on the Fenestrate regulator gears. Turn the Frame bolts in the direction of the needles of a watch until snug. To replug the wiring harness by pressing the adapter Catches together.

Press the Carry panel against the metal Carry until all pop rivets to have engaged in their holes. Some rivets may to have trouble lining up, so work the panel around until all of the rivets are tight.

Turn the arm rest bolts and the interior Carry handle Screw in a in the direction of the needles of a watch direction until they are snug.

Replace the power Fenestrate switch assembly by pressing the adapter Catches together, then allowance of the places the assembly in the panel's opening. majority types of switches used by Chrysler simply press in the panel.

Reconnect the positive Limit on the battery by rotation the Limit bolt clockwise.