Replace a Window Lift Motor on a Buick..

Sponsored ADS


Buick cars are manufactured with electric power windows, which use a motorized Fenestrate regulator to to increase or inferior the glass inside its doors. This Engine can use out, and to require replacement. The average back-yard mechanic can To replace a power Fenestrate motor in a Buick in about 30 minutes.

Sponsored ADS

Sponsored ADS

  • Step 1

    Disconnect the battery by rotation the positive Limit bolt counterclockwise. Place the Limit away of the battery.

  • Step 2

    Remove the power Fenestrate switches by rising the edge Coward with a screwdriver, then traction the switches far from the door. disconnection the wiring harness of the switch assembly by traction the adapter catch apart.

  • Step 3

    Remove the Carry panel by rotation the interior Carry handle screw counterclockwise. Turn the Balustrade bolts counterclockwise, if applicable, and to remove them. Tug on the edges of the Carry panel to disengagement the pop rivets that catch it to the metal. Work your way around the panel, to jump the rivets Coward until the entirety panel is freed. Set the panel aside, far from the work area.

  • Step 4

    Disconnect the Fenestrate motor of the wiring harness by traction the adapter catch apart. Some types have a small plastic hook that can be relieved with a screwdriver.

  • Step 5

    Remove the Fenestrate motor by rotation the Frame bolts counterclockwise, then traction the Engine from the speeds of the Fenestrate regulator.

  • Step 6

    Replace the Engine with a new unit, then position it in the regulator gears. blocked the Frame bolts by rotation them in the direction of the needles of a watch until they are snug.

  • Step 7

    Reattach the wiring harness to the Engine by pressing the adapter Catches together until you to hear a click.

  • Step 8

    Replace the Carry panel by pressing it on the pop rivets, firmly Pushed each rivet in its correspondence hole in the Carry metal. blocked the Balustrade bolts and interior Carry handle Screw by rotation them clockwise.

  • Step 9

    Replace the power Fenestrate switch assembly by fixing its wiring harness adapter catch (press together), then Pushed the unit in the Carry panel. The assembly is conceived to catch fast once the Back hooks passage the Carry panel material.

  • Step 10

    Reconnect the battery by rotation the Limit bolt in the direction of the needles of a watch until it is snug.

    		•  Sponsored ADS